Quality altitude control valve provider
Excellent altitude valve factory: Water Distribution Systems: Altitude valves are commonly used in water distribution systems to control water levels in elevated tanks or reservoirs. They ensure that the tank does not overflow or run dry by automatically adjusting the flow of water into and out of the tank. Irrigation Systems: Altitude valves play a crucial role in maintaining optimal water levels in irrigation systems. They help regulate the flow of water from storage ponds, ensuring that crops receive adequate irrigation without wasting excessive amounts of water. Fire Protection Systems: In fire protection systems, altitude valves help maintain adequate water pressure in standpipes and fire hydrants. This ensures that firefighters have sufficient access to pressurized water during emergencies. Discover additional info at altitude valve water tank.
Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.
One,Flanged center type butterfly valve is a butterfly valve with a center line design, which realizes fluid switching and adjustment by rotating the butterfly plate. The valve has the advantages of compact structure, light weight, small operating torque, quick opening and closing, small fluid resistance, etc., and is widely used in water supply and drainage, HVAC, fire fighting, industrial pipeline and other systems. The design of flanged center line butterfly valve meets international standards, and the material is selected from high-quality stainless steel or cast iron to ensure that the valve can work stably and reliably in various environments and use scenarios.
GV-Resilient seated gate valve is a soft seal disc which is fully encapsulated with rubber. The valve is designed with new technology for light operating, no clogging and no corrosion, good resilient memory & long service life. It can be used extensively in all kinds of water supply & sewage, fire-fighting and function as a shut-off or regulating valve. Features: Newly advanced design, less operation torgue & abrasion resistance; Body & Cover are made of high grade Ductile Iron; Disc is designed with an abrasion resistant nylon guide which can help less opening or closing torgue and smooth during operation; Forged stem provide stronger stem operation and less moving parts; Disc is covered by high-grade rubber which complies with drinking water; High-tech rubber curing with precise geometry dimensions, more resilient & strong adhesive to ductile casting; The 3 O-ring stem seals are designed to prevent stem leakage. and provide replacement of the O-ring without disassambling of valve from mainline pipes; Both inside & outside are coated with epoxy resin powder; Manufacturing standard meets BS EN 1074, BS 5163, BS EN 1171; F/F (Face to Face) meets the following standard: BS EN558-1. Discover extra information on shsuotevalve.com.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
Surge anticipating valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When a power failure take place, the abrupt stopping the pump can cause dangerous surges in the system which could result in severe equipment damage. Power failure to a pump will usually result in a down surge in pressure, followed by an up surge in pressure. The surge anticipating control valve opens on the initial low pressure wave, diverting the returning high pressure wave from the system. In effect, the valve has anticipated the returning high pressure wave and is open to dissipate the damage causing surge. The surge anticipator valve will then close slowly without generating any shock. Looking for quality surge anticipating control valve, visit here today!